Are you feeling difficult to remove
the Paper Jam in your Pixma Canon iP2772 Printer? In terms of paper jam in your Canon iP2772 Printer you
need to calm not to be panic. Just simply relax and stay cool because your
printer will never get hurt, just kidding. :)
Today, I will share you the steps on
how to remove Paper Jam in your Canon iP2772 with safety measures to avoid from
any damages while removing the Paper Jam. It’s because without any
precautionary measures and procedures any all of your steps may create
additional problem, right?
Procedure on how to remove Paper Jam:
- Turn off the printer and remove
from the outlet.
- Pull out your printer where it place,
bring it to the wide and light area.
- Open your iP2772 Printer cover and
see if where the paper jam positioned.
- Position the cartridge to the left
by dragging it.
- Use flash light to see if there
are some papers cut out.
- Look if where is the paper more
balance in position, if in the upper or lower.
- Pull the paper gently where it
more balance in position.
- After which close the printer
cover and return to its proper place.
- Plug all the cables to the printer
and turn it on.
Just simply the steps are that. Once
the printer is turn on and the green light becomes steady meaning to say, your
printer will back to normal mode and it will working again for you. But if the printer’s green and orange light
alternatively blinking it means there are something wrong or the cartridges are
not detected.
